Bollard for Small Tubes 48 mm Against Theft from Climbing Grimpo in Brown Painted Steel
Grimpo 48 mm: the bollard with spikes for pipes with a diameter from 42 to 50 mm
Grimpo 48 mm is an anti-theft device against theft of generic pipes and gas
pipes, for pipes with a diameter from 42 to 50 mm .
This anti-theft bollard is ...
- an excellent obstacle against thefts carried out by climbing from downspouts or pipes: the attacker is hindered by the pointed bars;
- easy to install , no electric tools are needed, it can be mounted with two screws included in the package, in case of incorrect installation it can be disassembled and reassembled without leaving traces;
- built in steel , and treated with epoxy paint to ensure high protection against atmospheric agents.
- is a Made in Italy artisan product .
4 good reasons to install a bollard in your home:
- Excellent obstacle against thieves : the spikes serve to remove the possibility that they can climb using the external pipes as holds.
- Easy to install : no power tools needed. You can mount it with two screws included in the package. In case of incorrect installation, you can disassemble it and reassemble it in another position or on another pipe;
- Zero infiltration on the downspout : thanks to the practical collar it does not pierce the downspout and therefore you do not risk leaks during the rain;
- Made of steel : it has a very resistant structure and is treated with epoxy paint to resist atmospheric agents.
How to install the Grimpo anti-thief bollard?
Installation is quick and easy . You can install it on the downspout through the supplied collar, with screws and nuts. This system avoids holes in the wall and downspout that could cause infiltration in the piping.
If you want to disassemble it, disassemble it and mount it in another place? You can do it whenever you want.
Where is the Grimpo 48mm collar installed?
- On small downspouts, small gas pipes and the like, near windows, balconies and terraces;
- To protect surveillance cameras, and anti-theft sirens.
Grimpo anti-theft bollard technical features
- Use : downspouts with a diameter of 42 to 50 mm;
- Material : steel;
- Anti-intrusion bars : 12 mm square point section (nr. 5) length 240 mm;
- Finish : epoxy paint for outdoors, brown RAL 8017;
- Covered area : 510x300 mm.
Grimpo, the obstacle against climbing theft
Grimpo products have a quick and easy installation. These effective anti-intrusion devices prevent thieves from exploiting certain points to make unexpected "nasty visits". Finding this obstacle along the climb, the attacker will be unable to reach his goal.
Are Grimpo anti-thief bollards in accordance with the law?
In order for the fixing to comply with the law, these anti-theft devices must necessarily be mounted at a height sufficient to prevent injury to people. The right of ownership, pursuant to Art. 832 of the Civil Code, gives its owner, owner of the property, the right to provide suitable means to defend the property (aimed at causing offenses to third parties who wish to disturb the enjoyment of the right of ownership ). These means (barbed wire, fences with pointed bars, etc.) are defined as "offendicula" and are subject to the justification pursuant to Art. 51 of the Criminal Code.
Therefore, such devices are allowed by law, provided that the following requirements are met: be in sight and not hidden, that they are not seriously harmful (i.e. that they offend disproportionately to the property to be defended, for example if they cause irreversible damage or death ), which do not cause damage to those who have no aggressive intentions and which are reported.
Grimpo products, if installed correctly, fully comply with the requisites required by the ruling pursuant to Art. 51 of the Criminal Code.
