Fischer KD CLEAR 40 290 ml - Crystalline sealing adhesive for glass, glass bricks and high aesthetic value applications
KD CLEAR 40 high modulus crystalline sealing adhesive based on hybrid polymers.
Permanent elasticity.
Professional bonding and sealing for glass
Fischer KD CLEAR 40 crystalline adhesive based on hybrid polymers suitable for applications of high aesthetic value.
The Fischer KD CLEAR 40 hybrid sealant is sold in
a 290 ml pack .
Advantages Fischer KD CLEAR 40 glass sealant
- CE marked for sealing facades (internal side);
- Good adhesion on damp substrates. Carry out a preliminary adhesion test in case of submerged applications;
- It does not smell and does not contain isocyanates or silicones;
- Not corrosive;
- Good resistance to chemicals. In extreme irradiation conditions it could change color and have a decrease in mechanical properties;
- Permanently elastic even after hardening;
- The product is paintable. Perform a preliminary test to evaluate compatibility with the paint;
- Do not apply where continuous immersion in water is possible.
Bonding of glass elements:
Suitable for:
- Glass;
- Wood (e.g. wooden beams and panels);
- Ceramic;
- Plastics (eg PVC, see exceptions);
- Metal (e.g. steel, aluminum, copper);
- Masonry (brick and calcium silicate) with and without plaster;
- Concrete (normal, lightened and cellular).
Not suitable for:
- Plastics (PE, PP, Teflon - PTFE, PC, PMMA);
- Silicone and bituminous substrates;
- Natural stone and mirrors (preliminary test recommended);
- Do not use in contact with chlorides.
Certificate for non-structural sealing of:
- Facades in the building sector, internal side, (eg prefabricated panels);
- Certified for use in contact with food.
Also suitable for bonding and sealing:
- Glass elements (invisible bonding);
- Accessories on glass surfaces;
- Glass - concrete;
- Windows and materials in contact with food.
Fischer KD CLEAR 40 assembly
- Clean and degrease the surfaces before applying the product. Grind or sandblast porous surfaces to ensure better adhesion;
- Adhesive: in the case of use as an adhesive, apply in coils or in sections so that the adhesive can be in contact with the air to activate the polymerization. Keep a distance of 10 to 20cm between the strips. Position immediately and hold firmly;
- Sealant: in the case of use as a sealant, apply the adhesive tape to the edges of the joint and apply the product therein. Level with a spatula. Remove the tape;
- Fresh adhesive can be removed with PUR500 cleaner, SAL70 wipes or acetone.
