Pasini FUTURA 4.0 - PVC roller shutter with rubber terminal - 14x55mm
Roller shutter slats size 14x55mm - Roller shutter with rubber terminal
The Pasini FUTURA 4.0 roller shutter is the evolution of the traditional Pasini solution for PVC shading systems. Guarantees excellent performance, rigidity and strength .
The Pasini FUTURA 4.0 roller shutter is available in a wide range of plain and faux wood colors. Produced with a compound studied and tested for over two years, the roller shutter is supplied in the version with rubber end .
If you wish on Windowo you can also buy the alternative Pasini FUTURA 4.0 TOP version with extruded aluminum terminal.
On request: fast delivery PVC roller shutter
Standard delivery time around 10-15 working days.
Fast delivery in just 3-4 working days by paying a surcharge of 19.9 euros (contact us if interested).
Pasini Futura 4.0 PVC shutter features:
- PVC roller shutter;
- Arched structure with longitudinal ribs;
- Overall dimensions 14 × 55 mm;
- Supplied with metal reinforcements one every two bars;
- Weight sq.m: about 6.20 kg;
- Weight mtl: about 260 g;
- Slats per square meter: 18.2;
- Maximum use guaranteed in width: 2,000 meters;
- Lateral stop;
- Equipped with rubber terminal;
- Base and height measurements made to measure;
- Choice of colors;
- Minimum m2: 1.5.
Directions for use Pasini roller shutter in PVC
- When the house is not yet inhabited, but with roller shutters installed, leave the rolled-up fabric inside the box. If this is not possible, refer to points 2 and 3.
- Keep the slats and the window slightly open to facilitate ventilation and therefore lower the temperature between the roller shutter and the window.
- Make sure that the sheet remains raised by at least 1 cm from the dock, to avoid that the weight of the roller shutter, acting on the end part, (last 5/6 slats) from causing deformation.
- Avoid installing overhanging frames, especially if they are of considerable size.
Be careful:
- The roller shutter for sale does not include the guides;
- The roller shutter will be shipped complete with a roller attachment system for manual handling;
- The roller shutter will be supplied with the holes and stop caps, if you do not want the holes contact us;
- The shutter will be supplied with slotted slats (except the first 5 slats), if you want all the blind slats contact us;
- Deadbolts on terminal or intermediate available on request.
How to take the measurements of the PVC roller shutter?
We advise you to proceed differently according to the type of intervention:
- Replacement of an existing roller shutter : it will be sufficient to select the product corresponding to the pre-existing roller shutter, to measure the size of the old roller shutter.
- Replacement or new installation of the roller shutter and the sliding guides : for the width of the roller shutter, with reference to the guides to be used, the necessary tolerances must be applied.
- Enter the finished measurements, in millimeters (base and height). By finished measurements, we mean the total measurements of the product, including any side caps and completion accessories.
For the choice of the shutter profile , (if a replacement is to be made), the height of the single plank is measured without considering the connecting hook between the slats.
When ordering, you will be asked to indicate the base and height measurements, specifying whether the roller shutter measurement is finished or empty.
What is the difference?
- Finished size (i.e. the exact size of the hole): the mosquito net will be supplied with the same measures ordered;
- Compartment size : the mosquito net will be supplied with 2-3 mm less base and height.
Lots of colors to choose from for your custom shutters
Pasini PVC roller shutters are offered online in a wide range of colors (they may vary from monitor to monitor).
Please note: Colors 3 - 7 - 8 - 25 - 10 - 22 - 11 - 26 - 13 - 19 - 29 - 30 - 31 - 32 - 33 - 34 -35 - 36 are never guaranteed for any loss of color.
If you want to be sure of the color, we advise you to contact us (color disputes will not be accepted if we have not been contacted before during the order phase).
Pasini PVC reels are produced in Italy
Pasini PVC roller shutters are rigorously and proudly
produced in Italy .
Born as a company specialized in the production of roller shutters, Pasini SpA over time has added more elaborate solutions to the original line, such as adjustable roller shutters and armored and burglar-proof roller shutters.
