Security Armored Shutter - Class 4 Burglar-proof - Pasini SAFEBLIND
SAFEBLIND Pasini 14x51 roller shutters: more light, air and safety
Pasini SAFEBLIND roller shutters are innovative extruded aluminum blinds: the main feature is their distance between the slats , of about 20mm.
This distance not only allows greater brightness , but also greater air exchange in the rooms, even with the roller shutter not completely raised.
The SAFEBLIND Pasini armored roller shutter, able to guarantee even greater security , is certified burglar- proof class 4 (In accordance with the European standards UNI EN 1627: 2011- UNI EN 1628: 2016 - UNI EN 1630: 2016).
The armored roller shutter that combines elegance and functionality
It is a safety roller shutter (approximately 14.5 kg per square meter) with a modern design. It blends elegance, functionality and resistance, enclosing the prerogatives of multiple shading systems in a single product.
To obtain the SAFEBLIND certification it must always be installed with the anti-lifting safety systems, our SecurBlocks and the recessed guides. It can also be installed on traditional guides (for replacement) using the appropriate gasket.
With no building work required for installation, SAFEBLIND is the perfect SCREEN product for renovations.
For its configuration it is possible to choose between different colors in RAL chart.
Features roller shutter with Safeblind Pasini distant slats
- Roller shutter in extruded aluminum with lateral connecting rods;
- Lamella size: 14 × 51;
- Weight m2: about 14.50 kg;
- Slats per square meter: 20.00;
- Maximum use guaranteed in width: 2,300 meters;
- Maximum use guaranteed at height: 2,500 meters;
- Rubber terminal.
Attention:
- The roller shutter for sale does not include the guides;
- The roller shutter will be shipped complete with a roller attachment system for manual handling;
- The roller shutter will be supplied with the holes and stop caps, if you do not want the holes contact us;
- The shutter will be supplied with slotted slats (except the first 5 slats), if you want all the blind slats contact us;
- Deadbolts on terminal or intermediate available on request.
How to measure the roller shutters?
We advise you to proceed differently according to the type of intervention:
- Replacement of an existing roller shutter : it will be sufficient to select the product corresponding to the pre-existing roller shutter, to measure the size of the old roller shutter.
- Replacement or new installation of the roller shutter and the sliding guides : for the width of the roller shutter, with reference to the guides to be used, the necessary tolerances must be applied.
- Enter the finished measurements, in millimeters (base and height). By finished measurements, we mean the total measurements of the product, including any side caps and completion accessories.
For the choice of the shutter profile , (if a replacement is to be made), the height of the single plank is measured without considering the connecting hook between the slats.
When ordering, you will be asked to indicate the base and height measurements, specifying whether the roller shutter measurement is finished or empty.
What is the difference?
- Finished size (i.e. the exact size of the hole): the mosquito net will be supplied with the same measures ordered;
- Compartment size : the mosquito net will be supplied with 2-3 mm less base and height.
Colored roller shutters: which color you decide
Pasini aluminum roller shutters are offered online in a wide range of colors (they may vary from monitor to monitor).
If you want to be sure of the color, we advise you to contact us (color disputes will not be accepted if we have not been contacted before during the order phase).
Pasini shutters are produced in Italy
Pasini roller shutters are strictly
produced in Italy .
Born as a company specialized in the production of roller shutters, Pasini SpA over time has added more elaborate solutions to the original line, such as adjustable
roller shutters and armored and burglar-proof roller shutters .
