Aerolife Siegenia Wall-mounted Energy-saving Ventilator Pollen Protection and Heat Recovery
The energy-saving universal ventilator with pollen protection and heat recovery.
On Windowo you can buy also the replacement filters (available for purchase separately).
Healthy fresh air without harmful substances or noise.
Truly cost effective with sustainable energy efficiency.
AEROLIFE wall-mounted ventilator scores well too in terms of energy saving ventilation without noise pollution and its pollen filter system.
This makes it a particularly good solution for bedrooms
and living spaces.
AEROLIFE product features:
- The device has 3 setting levels for the blower;
- Backlit LCD;
- Pollen filtering;
- Heat recovery of up to 66%;
- Indicates room temperature, air humidity and whether the filter;
- needs to be replaced;
- Integrated closing flaps.
Simple installation:
- Drill a hole with a diameter of 12 cm in the outer wall;
- Fix pipe and weather grille in place;
- On-wall and in-wall mounting possible.
Healthy fresh air without harmful substances or noise:
Your well-being, productivity and quality of life are all influenced by the air.
A lower CO2 level helps concentration. An optimal relative humidity of 40–60% keeps bacteria, viruses and mould at bay.
The damage caused by fine dust, fumes and pollen can also be kept in check with the right technology.
However, protection from noise is always a must for a truly untroubled and pleasant environment.
The continually increasing noise pollution from road, rail and air traffic is today the number one stress factor.
This can lead to insomnia, heart and digestion problems and even deafness.
Truly cost effective with sustainable energy efficiency:
The new German Energy Saving Regulations (EnEV) and the energy performance certificate have set a clear target for the considerable reduction of energy consumption in buildings.
Controlled ventilation technology using window-mounted and wall-mounted ventilators is a deciding factor here.
This is because air exchange by the conventional method of opening the window will very quickly cancel out the heating energy saved.
For this reason, numerous incentive programmes also support the installation of energy-efficient ventilation devices in many cases.
The heat exchanger for AEROLIFE:
- Fresh, cold outdoor air is drawn in;
- Used, warm air from the room is extracted;
- Path through the heat exchanger: the heat from the exhaust air is transferred to the supply air, warming it up;
- In-flow of heated, fresh air through side openings prevents draughts from occurring.
Quick and clean installation in around 45 minutes:
- Use a drilling template to align the drill with the extraction device;
- Cut the pipe length down to thickness of the wall, install carefully and seal on both sides;
- Install the ventilator on the wall;
- Mount and seal the weather grille on the outer wall;
- Plug the ventilator into a plug socket and it is ready for use.
