Solar Protection Film Reflectiv SOL 101 75% Internal Glazing

Solar Protection Film - Reflectiv SOL 101 - 75% - Internal Glazing

SOL 101 sun protection film was developed to attenuate the heat and intense brightness of the sun. The result in terms of comfort is exceptional in the case of environments highly exposed to sunlight. It contributes significantly to improving internal well-being and allows energy savings in the use of air conditioning. Offers 75% sun protection .

Reflectiv SOL 101: window film with 75% sun protection

The use of Reflectiv SOL 101 film brings a notable increase in comfort within environments, making them fresher and more pleasant. This film also contributes to a significant reduction in energy consumption, especially when using air conditioning, thanks to its efficiency in filtering up to 75% of the sun's rays .

75% sun protection, metallic silver color

Reflectiv SOL 101 film, with 75% sun protection, is ideal for indoor installation. This film is designed for application on glazing to reduce solar heat and glare. It offers a significant improvement in comfort in rooms exposed to the sun , contributing to real energy savings, particularly when air conditioning is in use. SOL 101 film is only suitable for clear double glazing smaller than 1.20m², clear glass between 4 and 10mm thick and tempered glass.

Composition and resistance of the films

Adhesive solar films are composed of two layers of vacuum metallized polyester , an adhesive and a protective film that is removable during installation. These films are scratch resistant.

Solar factor and greenhouse effect

The solar factor (G) of a glass measures the ratio between the total energy entering a room through the glass and the incident solar energy. This energy includes both the directly transmitted component and the component absorbed and subsequently released by the glass in the form of heat. The greenhouse effect occurs when solar energy, entering through the glass, is absorbed by objects and internal walls which subsequently emit thermal radiation, mainly in the far infrared (over 5 μm). Glass, even if transparent, blocks radiation at wavelengths greater than 5μm, thus trapping heat inside the room . This phenomenon is evident, for example, in a car parked in the sun with the windows closed.

Features of SOL 101 sun protection film

• Total Solar Energy Rejected: 75%
• Solar Energy Reflection: 55%
• Solar Energy Transmission: 12%
• Solar Energy Absorption: 33%
• Solar G Factor: 25%
• UV Block: 99%
• Support: PET
• Adhesive: Polymeric acrylic 19 g/m2
• Protector: 20 micron siliconized PET
• Thickness: 60 microns
• Color: Metallic Silver
• Application Side: Internal
• Application Temperature: min, + 5°C
• Standards: EUROCLASES
• Fire classification: B-s1, d0

Reflectiv sun protection films online at advantageous prices

Reflectiv positions itself as a European leader in the production of adhesive films for windows. The brand stands out in the sector for its ability to continuously innovate, creating new products in line with the requests of the most demanding customers. With a global distribution network, Reflectiv exports its advanced window films worldwide. Find Reflectiv window films at competitive prices online at Windowo.

How to install a Reflectiv solar film?

The surface where the film will be applied must be clean of any trace of dust, grease or other impurities. It is important to note that some materials, such as polycarbonate, may cause the formation of bubbles, making it advisable to carry out a preventive compatibility test.

Tools needed for installation include: a water sprayer, a scraper, a cutter, tape, a putty knife, a float and paper towels.

1. Clean the glass surface carefully;
2. First cut the film to the desired dimensions;
3. Apply two pieces of tape to one corner of the film to make handling easier;
4. Spray the window with water and position the film, holding the adhesive side towards you;
5. Remove the protective film;
6. Abundantly moisten the adhesive side of the film;
7. Turn the film over and apply the adhesive side to the glass surface;
8. Spray the film to facilitate the sliding of the squeegee on the glass;
9. Smooth with the spatula to eliminate air bubbles and excess water;
10. Trim the excess edges using the cutter;
11. Model again on the glass and clean the edges for a perfect finish.

• Reflectiv SOL 101 Solar Protection Film (2,36 MB)