Striped Window Film Reflectiv STR 06 Privacy Image Distortion

Striped Window Film - Reflectiv STR 06 - Image Distortion Effect

STR 06 Reflectiv: decorative film for internal application

Features Reflectiv STR 06 decorative adhesive film

• Support: PET;
• Color: Colorless;
• Adhesive: Acrylique Polymère 13 G/M2;
• Protector: 19 microns siliconised PET;
• Thickness: 80 microns;
• Application side: Internal;
• Fire classification: B-S1,D0;
• Application temperature: Min +5°C;
• Standards: Euroclasses;
• Warranty: 10 years internal application (without direct exposure to the sun);
• Durability: 5 years for vertical application in Central Europe;
• Use: for all types of glass;
• Maintenance after 30 days: with a normal detergent solution (non-abrasive, ammonia-free, etc.). Cleaning products that may scratch should be avoided;
• Storage: 2 years from delivery. This film should be stored away from excessive humidity and direct sunlight, at a temperature below 38°C.

How do you apply Reflectiv window film?

1. Clean the window;
2. Pre-cut the film;
3. Glue two pieces of tape to one corner of the film;
4. Spray the window and stick the film with the sticky side facing you;
5. Remove the adhesive film;
6. Wet the adhesive side thoroughly;
7. Turn the film over and apply the adhesive side to the glass;
8. Spray the film to allow the squeegee to slide well on the glass;
9. Press with spatula;
10. Trim the edges with a utility knife;
11. Shape the glass again and clean the edges.

• Reflectiv STR 06 Window Film Strips (50,42 MB)