Polyurethane Foam for Windows Torggler F 2.0 - Pack of 750 ml Gun Application
- One-component elastic polyurethane foam for the assembly of counter frames and window frames in wood, PVC or aluminum;
- It guarantees speed and cleanliness in the installation operations;
- Adheres to most porous and non-porous substrates;
- Easy and practical application;
- Excellent alternative to laying multifunction self-expanding tapes;
- Hermetic seal;
- Paintable;
- EC1 plus very low emission certified.
F 2.0 Torggler Polyurethane Foam
Hardening occurs by reaction with the humidity of the atmosphere and of the substrates.
Once hardened, thanks to its flexibility, it
absorbs the vibrations and small movements of the structure, compensates for the thermal expansion of the supports, avoids the dispersion of heat, the infiltration of water and guarantees thermo-acoustic insulation at the door installation joints. and windows.
It maintains its characteristics and
performance even at extreme temperatures , as long as it is protected from UV rays.
Fields of use Polyurethane Foam F 2.0
As part of the installation of the windows, sealing of the primary joint (between the wall and the counterframe) and the secondary joint (between the counterframe and the fixed frame) in accordance with UNI 11673-1.
Flexible filling of joints of all types and with any orientation, inside and outside, between building elements, in: concrete, masonry, bricks, stone, mortar, plaster, plasterboard, fiber cement, wood, metal, glass, EPS and XPS sheets, plastic materials, etc. Ceiling infill in internal partitions and sealing of system crossings in the walls or attics, if a high level of flexibility is required when filling.
F 2.0 Torggler polyurethane foam warnings
- Do not apply at temperatures below 0 ° C;
- Use Solvent for polyurethane foam to clean tools and any edges while F 2.0 is still fresh; mechanically after hardening;
- It does not adhere to oily substrates, PTFE, polyethylene, polypropylene and porous materials totally soaked in water.
The cylinder of the F 2.0 Torggler is a pressurized vessel. Protect from sunlight and do not expose to temperatures exceeding 50 ° C. Do not pierce or burn even after use. Do not spray on a flame or an incandescent body. Extremely flammable: keep away from any source of combustion. Not smoking. Especially if several cylinders are used in the same place, there is a danger of the formation of explosive air / gas mixtures. Keep out of reach of children.
Technical data polyurethane foam Torggler F 2.0 windows
- White color;
- External temperature during application: + 5 / + 35 ° C;
- Operating temperature: -40 / + 90 ° C;
- Surface film (at 23 ° C and 50% RH) (MIT 101): 6 - 10 minutes;
- The bead can be cut (Ø 20 mm at 23 ° C and 50% RH) (MIT 101): 20 - 40 minutes;
- Density: 20-25 g / l;
- Volume loss (shrinkage) (FETIC TM 1004): <5%;
- Post expansion of the curb (MIT 101);
- Approximate yield: 35 - 40 liters;
- Reaction to fire (DIN 4102): B3;
- Closed cells: ± 70%;
- Water resistance: excellent;
- Resistance to detergents: excellent;
- Resistance to chemical agents: good;
- Resistance to UV rays: poor;
- Resistance to microorganisms: excellent;
- Version: pistol.
Torggler professional polyurethane foams
In the toolbox of every professional there is polyurethane foam: bricklayers, painters, window and door manufacturers, plumbers, electricians, tinsmiths, roofers, carpenters use it in the most disparate uses, when there is the need to perform filling or guarantee a high thermal-acoustic insulation capacity to the sealed cavities.
Where to buy Torggler polyurethane foam? You can find it for sale online in the Windowo shop.
